Most of the crusher machine suppliers will provide the machine’s installation tasks for the clients. You do not need to worry about the machine installation question. To solve clients’ consults, we will provide the cone crusher machine installation and commissioning tips for clients and we do it will be helpful.

Steps of Cone Crusher Installation and Commissioning

Cone crusher machine installation and commissioning is the precondition of machine’s normal operation. It is an important work and here we will introduce this work in the following steps and analysis these works for you all:

The machine needs to be installed on the horizontal concrete based and is fixed by the foundation bolt. Cone crusher machine is designed and produced to process mineral ore. The mineral ore has high hardness. In the crushing process, the machine is inevitable to have vibration. It needs to install the cone crusher on the concrete base and is fixed by the foundation bolt. The thickness of concrete base is depending on clients’ local geological conditions. Besides, if the machine is not installed on the horizontal, it will make the machine incline. Then it will make the crushing force uneven and it is very easy to be dangerous. It needs to make the concrete base in even and make the cone crusher cylinder has vertical with the horizontal.

When you install the machine, you need to check every part bolt whether is loose and the host bin gate is closed. The tighten bolts will prevent the machine have dangerous. Cone crusher bin gate will be used to check the machine inside structure when the machine is stopped. When cone crusher works, it needs to close and prevent the materials fly out from the machine to have dangerous.

Assemble the power source and control switch depending on the machine’s power. Cone crusher production line includes a lot of machines. All of these machines have different best power and it needs clients to assemble the power source and control switch depending on the machine’s power. It will avoid some large power to burn the machine.

When you check all of these, you can have the no-load commissioning. If the commissioning is normal and it can be used in the production line.

If you install the cone crusher machine depending on the above steps, it can have the no-load commissioning. If the commissioning is normal and it can be used.